VersaCourt Solutions

Quality assurance does not stop at turf selection, but continues into the applied installation methodology of the contractor. Artificial grass installations require a keen and careful eye for detail and an understanding of the material. An installation done by a contractor without the necessary experience will quickly show signs of degeneration, even if a premium grass product was used. Purchase Green recommends learning at least the basics of the installation process so that you are prepared to thoroughly consult with contractors during estimations.

What is important to know about perimeters is that they are the most susceptible to wear over time and should be secured appropriately per the anticipated foot traffic of the application. For example, securing the perimeter line with 5” non-galvanized nails every 3” will certainly do the job, but is only recommended for light traffic areas. On the other hand, for higher traffic applications requiring a more robust hold, perimeter boards can be installed as reinforcement – such as a landscape Bend-a-Board or subgrade Bend-a-Board. These options also add an aesthetic value, with landscape Bend-a-Board providing clean and defined perimeter lines and subgrade Bend-a-Board giving the look of a more natural, manicured edge.

Due to the way rolls of turf are stored, most blade types will end up leaning toward one direction, and this grain will impact the aesthetic of an installed grass. The general rule of thumb is to orient pieces of turf so that the grain of the blade is leaning toward the main vantage point. For example, if you are installing in a front yard, orient the blades toward the street; if you are installing in a backyard, orient the blades toward the property. However, this is optional. Oftentimes installers will disregard this rule if there is a more cost-effective layout to reduce material cost, as turf roll widths are generally unalterable and typically come 13.1 feet or 15 feet wide.